This is file README_SMLSERVER

           SMLserver home page: http://www.smlserver.org

INTRODUCTION
------------

SMLserver is an SML module for Apache2. SMLserver supports Web server
interpretation of bytecode compiled Standard ML scripts. Both ML
Server Pages [1] (i.e., msp-files) and plain sml-files, using an SML
interface to the Apache2 API, are supported.

SMLserver uses a load-once-execute-many scheme for executing sml-files
and msp-files. Together with database pooling, the scheme makes it
possible to create database backed Web sites in Standard ML that are
capable of responding to a high number of requests compared to systems
using a traditional CGI based approach. The database API supports a
variety of different RDBMS's, including Oracle, PostgreSQL, and MySQL.

Project files (mlb-files) maintained by the Web programmer are used to
keep track of library modules, msp-files, and sml-files that are part
of the Web project. When a page is requested, SMLserver first checks
if the library modules are loaded.  If the library modules are not
loaded, SMLserver loads the library modules. Then the page requested
is loaded and executed, leaving the library modules loaded for reuse
by other requests. Only when the project is recompiled or Apache is
restarted, the library modules are reloaded.

The book "SMLserver - A Functional Approach to Web Publishing (Second
Edition)" [2] is available for download from the SMLserver home page.

SYSTEM REQUIREMENTS
-------------------

To use SMLserver you need the following:

  * Linux Box (e.g. Debian)

  * Apache2.

  * SMLserver. Binary packages and source packages are available from
    the SMLserver home page; see the top of this file. 

  * An RDBMS. To get access to a database from within your Standard ML
    scripts, you need to have an RDBMS system installed that is
    supported by SMLserver - see below. One such RDBMS is PostgreSQL,
    which you can fetch from www.postgresql.org. Detailed information
    about setting up a database with PostgreSQL for the purpose of
    using it with SMLserver is given below.


BUILDING SMLSERVER FROM THE SOURCES WITHOUT DATABASE ACCESS
-----------------------------------------------------------

Requirements: 

 1) a working Apache2 webserver 
 2) apxs2 installed (e.g., apache2-threaded-dev)
 3) mlkit >= 4.3.0 compiled and installed
 4) bison, flex

SMLserver installation after unpacking the SMLserver sources into
directory kit:

 $ cd kit
 $ ./autobuild
 $ ./configure --enable-SMLserver --with-apxs=`which apxs2` --with-compiler=`which mlkit`
 $ make smlserver
 $ make smlserver_libs
 $ sudo make install_smlserver

Apache2 configuration for SMLserver:

 Edit /etc/apache2/apache2.conf: 
  Add index.sml to DirectoryIndex list

 Edit /etc/apache2/sites-available/default:
  Change DocumentRoot to /home/mael/web/www
  Change Directory path to /home/mael/web/www
   
 $ sudo cp /usr/local/lib/smlserver/lib/mod_sml.so /usr/lib/apache2/modules/
 $ sudo echo "LoadModule sml_module /usr/lib/apache2/modules/mod_sml.so" > /etc/apache2/mods-available/sml.load

 Create the file /etc/apache2/mods-available/sml.conf with the following content:

  <IfModule mod_sml.c>
    AddHandler sml-module .sml
    SmlPrjId "web"
    SmlPath "/home/mael/web/www/"
    SmlInitScript "/home/mael/web/www/../web_sys/init.sml"
  </IfModule>
  #<Directory /home/mael/web/www/web/secret>
  #  SetHandler None
  #  RewriteEngine On
  #  RewriteBase /web/secret
  #  RewriteRule .* pub.sml
  #</Directory>

 $ sudo ln -sf /etc/apache2/mods-available/sml.conf /etc/apache2/mods-enabled/sml.conf
 $ sudo ln -sf /etc/apache2/mods-available/sml.load /etc/apache2/mods-enabled/sml.load
 $ sudo apache2ctl stop
 $ sudo apache2ctl start

SMLserver configuration and demonstration:

 $ cd $HOME
 $ mkdir web
 $ cp -pa /usr/local/lib/smlserver/{www,web_sys,web_lib,web_demo_lib} web/ 

 Make sure the database configuration lines in web/web_sys/init.sml
 are commented out.

 $ cd web/www
 $ make

Point your browser to http://localhost/web/

BUILDING SMLSERVER FROM THE SOURCES WITH Postgresql ACCESS
----------------------------------------------------------

Additional requirements: 

 1) postgresql (e.g., Debian package postgresql-8.1)
 2) unixodbc: (e.g., Debian packages unixodbc, unixodbc-dev, odbc-postgresql)

Do as above, but with the changes below.

Add the following lines to /etc/odbc.ini (replace 'user' with your login
name):

 [psql]
 Description = PostgreSQL
 Driver      = /usr/lib/odbc/psqlodbca.so
 Database    = user
 Servername  = localhost
 
Add --enable-odbc to the ./configure command:

 $ ./configure --enable-SMLserver --with-apxs=`which apxs2` --with-compiler=`which mlkit` --enable-odbc

After make install_smlserver:

 $ sudo ln -sf /usr/local/lib/smlserver/lib/libsmlodbc.so /usr/lib/

Make sure postgresql is started:

 $ sudo /etc/init.d/postgresql-8.1 restart

Create a database user with the same name as your login name on
the Linux box:

 $ sudo su - postgres
 $ createuser -P user

Invent a new password for the database user. Answer yes to the questions 
asked by createuser.

As user, create a database (also called user)
as follows:

 $ createdb $USER

Install the data models for the sample Web programs by executing:

 $ cd $HOME/web/web_demo_lib/pgsql
 $ psql -c "\i all.sql"

Verify that the database is available using isql:

 $ isql psql user passwd
 > select * from guest;
 > q

 (you should see a message from Homer Simpson...)

Restart Apache2 by executing the command 

 $ sudo apache2ctl stop
 $ sudo apache2ctl start

After copying the sample Web directory to $HOME, as described above,
edit the file $HOME/web/web_demo_lib/Db.sml. Make sure that the structure
DbBackend passed to the DbFunctor is the structure Web.DbPgBackend.
The lines defining the Oracle structure and the MySQL structure should
be commented out.

Edit the file $HOME/web/web_sys/init.sml. Enable the Postgresql
configuration lines.

Compile the sample Web project as described above.

Go start your Web browser and visit the database examples available
from http://localhost/web/index.sml.

BUILDING SMLSERVER FROM THE SOURCES WITH Oracle ACCESS
------------------------------------------------------

to build Oracle interface:
download Oracle Instant Client + SDK
cd /abs/path/to/oracle/instant/client/sdk
ln -sf libclntsh.so.10.1 libclntsh.so
cd mlkit/kit
proceed as above with this configure command
configure  --enable-SMLserver --with-apache=/abs/path/to/apache \
           --with-oracle=/abs/path/to/oracle/instant/client/and/sdk \
           --with-compiler=/path/to/compiler

before starting Apache:

unzip instant_client /abs/path/to/smlserver/lib
set LD_LIBRARY_PATH to /abs/path/to/smlserver/lib


REFERENCES  
----------
  
[1] A system for running ML Server Pages using the Apache Web server
    CGI support was first implemented by Peter Sestoft. For
    information about this work, consult
    http://www.dina.kvl.dk/~sestoft/msp

[2] Martin Elsman, Niels Hallenberg, and Carsten Varming. SMLserver -
    A Functional Approach to Web Publishing. Second Edition. February
    2007. Available from SMLserver home page (see above).